BinMaster
Level Controls
Rotary
Capacitance Probes
Continuous Level
Tilt Switch & Pressure
Vibrating Rod
Flow Detection
Dust Detection
Aeration & Material Flow |
 Rotary
- De-energized motor operation extends service life due to the
reduction of wear and operating temperature
- Bi-directional clutch assembly prevents gears from stripping when
material shifts and rotates paddle clockwise or counter clockwise
- Three-bearing drive shaft assembly reduces motor drag during paddle
rotation which increases motor service life
- Brochures in PDF format -
GR Series -
GRD Series -
GR II Maxima
Capacitance Probes
- Electronic stability that will firmly hold calibration
- Temperature stable from -40°F to +180°F
- Incorporate a unique discharge time constant detector circuit which
allows sensing capacitance changes less than 1 Pico farad
- PRO series probes operate at approximately 6 kHz and do not generate
radio frequencies -- we are true capacitance
- Four level of static safeguards; (1) Static Drain (2) Gas discharge
tube that does not allow voltage to rise above a certain level (3)
By-Pass Capacitance on input passes a fast impulse to ground (4) Current
Limiting series resistance on probe
- Fail Safe fault detection monitoring
- The "Quick Set" calibration feature allow for simple setup and
calibration of the unit to achieve low, medium, or high sensitivity
settings. Units are calibrated with the probes uncovered.
- Multiple power capabilities
- New stronger 5/8" stainless steel probe
- 3/4" NPT and 1 1/4" NPT mounts standard on all 5/8"probe units.
- PRO series (excluding Pro III) feature the PRO-Shield to guard
against false indications from material side wall buildup on the sensing
probe
- Standard Delrin insulated sleeve probes that are highly abrasion
resistant and inexpensive to replace should they wear out. Allows the
probe to function in both dry solid or liquid applications. These
sleeves also give us the coated probe necessary for explosion proof and
food grade applications.
- Multiple power pack, probe and fitting options
- All components designed for industrial application
- Brochures in PDF format -
Pro I -
Pro X -
Pro II X -
Pro DC -
Pro Auto-Cal -
ProRemotes
Continuous Level
- On demand level measurement system based on proven and reliable
principle of operation
- Microcontroller based electronics for fast and accurate
measurements, with resolution of .15"
- Electromechanical remote sensing devices link through PC, DCS, or
PLC communication to create an inventory management system with process
control
- System will supervise one to an unlimited number of vessels (30 per
serial port)
- Minimal field wiring (twisted pair cable & 2 power lines) design
reduces installation and expenses
- Graphical presentation of percent full, measurement to and of
product, weight and remote sensor status
- IMS software package provides audible and visual indicators,
high/low level alarm, measurement scheduling, inventory history data
files, and printer interface capabilities
- Stainless steel cable with captive pulleys and cable spool
- Variety of probe designs for solids, slurries, and liquids
- Explosion proof enclosure -Class I Groups C&D, and Class II Groups
E, F, & G
- Brochures in PDF format -
SmartBob II -
SmartSonic -
SmartWave
Tilt Switch & Pressure
The BinMaster Tilt
Switch Level Indicator is a versatile, low-cost indicator which can be
used for a wide variety of applications. Install as a plug detector in
chutes, or use it to detect high levels of large heavy materials in tanks,
bins or silos. It is also suited as a load sensor when positioned over
conveyor belts or open piles.
- Highly sensitive
- Reliable, simple
operation
- Low Cost
- Lightweight, yet
rugged
- High-level or
limit switch applications
- Brochures in PDF format -
BM 45 -
BM 65 -
Tilt Switch
For more Information please visit
BinMaster |
